| |
|
 |
the
GreenTech Solution
for existing and newly constructed fireplaces
|
Cleanest Burning Open Hearth
masonry fireplace in the worldthe First modular masonry
fireplace to qualify under the
EPA voluntary wood-burning fireplace program
Reduce Particulates by 80%
Exceeds 5.1 g/kg requirements
Easily Adaptable - Installs in minutes
in new and existing fireplaces
|
 |
|
"Enjoy the warmth of a wood burning
fire while contributing to a clean environment."
The Isokern GreenTech Solution is the first modular
masonry fireplace to qualify for the
EPA Voluntary Wood-Burning Program by reducing particulates
emissions up to 80% leaving your community with a
breath of fresh air. Particulate matter from wood
smoke pollution is proven to be extremely unhealthy and
earthcore ®
has the ultimate clean burning alternative!/p>
Our Catalyst nano-technology
is easily adaptable to any masonry fireplace and any Isokern
fireplace system, new or existing. Our GreenTech
Solution provides secondary ignition for the wood smoke
before leaving the firebox. The direct flame on
the catalytic surface actually cleans the unit, which
creates a maintenance free technology.
Within the next few
years Air Quality Management Districts around the
world will require all wood burning fireplaces to
qualify under the EPA voluntary wood-burning fireplace
program. Do your part in
contributing to a healthy environment with the advanced
technology only available from earthcore®.
The Catalytic Combustor system should be replaced
at a minimum of 3 years (with heavy use), maximum of 5 years
(with moderate use).
EPA Program Qualified System
Tested and Listed to:
UL127
ULC S610-87
EPA Burn Wise Program
-
Partnership Acceptance Letter
EPA Program Qualified System
Documentation:
Listing on the EPA Website
|
|
The EPA Catalytic
combustor system from
Earthcore provides a cleaner
burning option for your wood
and gas fireplaces and
qualifies for the voluntary EPA
wood-burning fireplace
program. Earthcore's
GreenTech Series exceeds
Phase 2 levels of 5.1 g/kg by
40%.
The
Combustor will
have a tag (see left) attached to the
hood for verification of
authenticity. This tag must be
kept in the homeowners'
files along with the
Installation Manual.
|
|
Contact the Technical Department for more information at 800.642.2920.
DOWNLOAD BROCHURE |
 |
|
|
|
|
 |
|
 |
|
|
|
|
| |
|
|
|
|
